Beijer-electronics SCOM Protocol EN Manuale Utente Pagina 96
- Pagina / 131
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
Command Reference
96 Beijer Electronics, MAEN975
6.55 LAU_CONTROL_BUZZER (0x0202)
Buzzer Control
Activates the built-in buzzer, if available.
Supported since Firmware Version
MT230 Nautic Monitor: 1.0
Command Stream
Response Message (Acknowledge)
Response Message (Negative Acknowledge)
Under normal operation conditions, a negative acknowledge message does not con-
tain any status data in response to this command. This response message is only sent,
if there is insufficient data in the command stream.
Maximum Lr for this Command
11
0 1 2 3 4 5 6 7...9 10
0x07 ADR
0x4C 0x41 0x55 0x03 ICHKH 0x02 0x02 Param ICHKD
Param
Value: 0x00: Disable buzzer
0x01: Enable buzzer
Type: Byte
Length: 1
Description: Buzzer control
0 1 2 3 4 5 6 7...9 10
0x06 ADR
0x4C 0x41 0x55 0x03 ICHKH 0x02 0x02 Ret ICHKD
Ret
Value: 0x00: Buzzer disabled
0x01: Buzzer enabled
Type: Byte
Length: 1
Description: Current buzzer state
0 1 2 3 4 5 6 7...8 9
0x15 ADR
0x4C 0x41 0x55 0x02 ICHKH 0x02 0x02 ICHKD
- SCOM Protocol 1
- Foreword 2
- Contents 3
- 1 Interface Configuration 7
- 2 Ethernet Communication 8
- Dynamic Addressing 9
- Static Addressing 9
- Sample Application 10
- SCOM Message Basic Format 11
- 4 Monitor Addressing 13
- Ti: Inter-message gap [s] 14
- Delayed Response 15
- Related information 16
- 6 Command Reference 17
- 6.1 BRT 18
- 6.2 MAN 20
- 6.3 VER 21
- 6.4 POT 22
- 6.5 MCC 24
- 6.6 MCC_BRIGHTNESS (0x81) 26
- 6.7 MCC_CONTRAST (0x82) 29
- 6.8 MCC_SCALINGMODE (0x8C) 32
- 6.9 MCC_GAMMAVALUE (0x9D) 34
- 6.10 MCC_COLOURTEMP (0xB3) 36
- 6.11 MCC_REDLEVEL (0xB4) 38
- 6.12 MCC_GREENLEVEL (0xB5) 41
- 6.13 MCC_BLUELEVEL (0xB6) 44
- 6.14 TYP 47
- 6.15 ETC 48
- 6.16 LAU 50
- Firmware Version 52
- Host Name 53
- MAC (Ethernet) Address 55
- Static IP Address 56
- Subnet Mask 57
- Gateway Address 58
- DHCP Mode 59
- (0x0109) 60
- (0x010A) 61
- (0x010B) 62
- (0x010C) 63
- (0x010D) 64
- DIL Switch Mode 65
- (0x010F) 66
- (0x0110) 67
- Baudrate 70
- POT Mode 71
- ECDIS Mode 72
- (0x0115) 73
- (0x0116) 74
- (0x0117) 75
- (0x0118) 76
- (0x0119) 77
- (0x011A) 78
- (0x011B) 79
- (0x011C) 80
- (0x011D) 81
- (0x011E) 82
- (0x011F) 84
- (0x0120) 85
- (0x0122) 88
- (0x0123) 90
- 0 1 2 3 4 5 6 7...8 9 91
- 0 1 2 3 4 5 6 7 8 91
- (0x0125) 92
- (0x0127) 93
- ECDIS Mode Control 94
- Buzzer Control 96
- Digital Output Control 98
- 6.57 LAU_CONTROL_ANALOGTOBRT 100
- (0x0204) 100
- 0 1 2 3 4 5 6 7...9 10 101
- 0x07 0x07 101
- (0x0205) 102
- Command Reference 103
- Example 103
- Digital Input Configuration 104
- Current IP Address 106
- Current Monitor Address 107
- Current POT Mode 110
- Current ECDIS Mode 111
- Current Buzzer State 112
- Current Backlight State 113
- Current Analog Input Value 117
- (0x030C) 119
- (0x030E) 122
- 7 Sample Communication 125
- Application 125
Prodotti e manuali riguardandi Monitor Beijer-electronics SCOM Protocol EN
(22 pagine)
(58 pagine)HP Serveur lame HP ProLiant BL685c manuali
Manuali dei proprietari e guide per l'utente per Hardware del computer HP Serveur lame HP ProLiant BL685c.
We fornisce 1 manuali pdf HP Serveur lame HP ProLiant BL685c per scaricare gratuitamente in base al tipo di documento: Manuale Utente
Commenti su questo manuale