Beijer-electronics EXTER K20m EN Manuale Utente Pagina 21
- Pagina / 28
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
Additional Installation Tips
Beijer Electronics, MAEN852A 21
6 Additional Installation Tips
When experiencing communication problems in for example noisy environments or
when operating close to temperature limits, the following recommendations are to be
noticed.
6.1 Grounding the Operator Panel
1. The operator panel’s mounting clamps do not provide a secure grounding con-
nection between the panel and the device cabinet.
2. Connect a 2.5 mm
2
wire between the operator panel’s quick-connect plinth and
the panel chassis.
3. Connect a 6 or 4 mm
2
wire or grounding braid between the panel’s chassis and
the closest grounding point on the door.
4. Connect a strong but short grounding braid between the door and the device
cabinet.
5. Twist the cables onto the 24 V DC feed.
6. A ferrite core suppresses disturbances to the 24 V feed.
2 turns around the ferrite core provide 4 times the suppression of 1 turn.
3 turns around the ferrite core provide 9 times the suppression of 1 turn.
Remember:
The grounding wires should be short and the conductor should have a large area.
A long, thin grounding wire has a very high impedance (resistance) at high frequencies
and will not guide disturbances to the ground.
Multi-wire conductors are better than single wire conductors with the same area.
A braided conductor wire with the same area is even better.
The best is a short, thick grounding braid.
1
2
3
4
5
6
Door
Operator panel
Ferrite core
Mounting plate in the cabinet
Power supply
24 V DC
- EXTER™ K20m 1
- Foreword 2
- Table of Contents 3
- 1 Safety Precautions 5
- 1.2 General 6
- 1.3 During Installation 6
- 1.4 During Use 7
- 1.5 Service and Maintenance 7
- 1.6 Dismantling and Scrapping 7
- Safety Precautions 8
- 2 Installation 9
- 2.2.1 Mode Switches 11
- Installation 12
- 3Technical Data 13
- Technical Data 14
- 4 Chemical Resistance 15
- 4.2.2 Touch Screen Surface 16
- 4.2.3 Autoflex EB 16
- 5Operator Panel Drawings 17
- 5.2 EXTER K20m Outline 18
- 5.3 EXTER K20m Text Strip 19
- Operator Panel Drawings 20
- Operator panel 21
- Ferrite core 21
- Mounting plate in the cabinet 21
- Power supply 21
- Cable clamp 23
- Short distance 23
- 6.4 Ambient Temperature 24
- 6.5 Safety 25
- 6.6 Galvanic Isolation 26
Prodotti e manuali riguardandi Pannello di controllo Beijer-electronics EXTER K20m EN
(30 pagine)
(30 pagine)
(30 pagine)
(31 pagine)
(30 pagine)
(28 pagine)IBM NWAYS 712 podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Nie IBM NWAYS 712.
Dostarczamy 1 pdf podręczników IBM NWAYS 712 do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Commenti su questo manuale